|
Post by woodtoner on Dec 9, 2021 12:44:15 GMT
The latest build from the workshop of House of Shitson...
After this happened trying to remove the neck..(stupid extra stong glue was obviously used instead of the prefferred sticky-backed plastic and blutack. (amatures!))
I decided the best way was to very carefully rest the neck on a valve amp and give the body of the guitar a carefully aimed kick with both feet either side of the fretboard. _
But all the long hard minutes of thoughtful craftsmanship will pay off in the end! I have a cunning plan you see..
What could possibly go wrong?? watch this space..
BTW I'm happy to give luthiery advice, tips and tricks free for members of this forum. I'm even considering running a course - it will probably run for 5 1/2 minutes for a very reasonable £1500. Llimited spaces are available!
Thanks, Ashley
C.E.O Shitson House of Fine Custom Guitars
|
|
leoroberts
C.O.G.
Posts: 24,452
My main instrument is: probably needing new strings
|
Post by leoroberts on Dec 9, 2021 16:26:03 GMT
|
|
|
Post by Onechordtrick on Dec 9, 2021 16:43:02 GMT
At last a "craftsman" who follows my mantra of "if at first you don't succeed try a heavier hammer".
I've got a little fret buzz - if I sent the guitar over would you give it a quick going over with your angle grinder?
|
|
|
Post by woodtoner on Dec 9, 2021 17:09:36 GMT
Most certainly - I can do a cutaway too when i get some petrol in my chainsaw. In response to the cease and desist letter from Gibson I have had to re-brand. What do you think of my new logo?
|
|
|
Post by woodtoner on Dec 9, 2021 18:32:02 GMT
Most certainly - I can do a cutaway too when i get some petrol in my chainsaw. In response to the cease and desist letter from Gibson I have had to re-brand. What do you think of my updated logo? It seemed to cause a big computer crash..the black helicopters from gibson are messing with me i think..
|
|