|
Post by georgeriley on Jan 12, 2014 20:16:10 GMT
ive just been given a Artec soundhole pickup but no end pin on it before i shell out on one is there anyway i can test it
|
|
|
Post by alembic1989 on Jan 23, 2014 7:06:43 GMT
Hi..if you have a multimeter...connect it across the 2 wires with the meter set to measure resistance......you should get a reading in the order of k ohms. If you get a reading of zero ohms, or 'infinite' ohms....then the pick up won't work. hope that helps.
|
|